DW-PX Inductive Proximity Sensor, M8 to M30, NPN or PNP

DW-PX

Inductive Proximity Sensor, M8 to M30, NPN or PNP

Cylindrical inductive proximity sensor in M8, M12, M18 and M30 threads, flush or non-flush, with rated sensing distances from 1.5 to 15 mm, NPN or PNP NO/NC output, a 10–30 V DC supply and IP67, for detecting metal targets without contact.

Thread specification
M8 / M12 / M18 / M30
Output type
NPN or PNP, NO or NC
Protection
IP67

Features

  • Non-contact detection of metal targets
  • M8, M12, M18 or M30 metal housing, flush or non-flush mounting
  • NPN or PNP output, NO, NC or NO+NC
  • 2 m PVC cable or M12 connector
  • Short-circuit, overload and reverse polarity protection
  • Yellow LED output indicator, IP67

Full specifications

PDF DW-PX Datasheet EN
DW-PX specifications as published. Values are typical unless stated.
Performance
Thread specificationM8 / M12 / M18 / M30
Installation methodFlush or non-flush
Rated sensing distance SnM8: 1.5 / 2 mm; M12: 2 / 4 mm; M18: 5 / 8 mm; M30: 10 / 15 mm (flush / non-flush)
Assured sensing distance SaM8: 0–1.2 / 0–1.6 mm; M12: 0–1.6 / 0–3.2 mm; M18: 0–4 / 0–6.4 mm; M30: 0–8 / 0–12 mm
Standard targetFe 8×8×1 mm (M8); Fe 12×12×1 mm (M12); Fe 18×18×1 / 24×24×1 mm (M18); Fe 30×30×1 / 45×45×1 mm (M30)
Switching frequencyM8: 2000 / 1500 Hz; M12: 1500 / 1000 Hz; M18: 1000 / 800 Hz; M30: 500 / 300 Hz
Switch-point drift≤±10% Sr
Hysteresis1–20% Sr
Repeatability≤3%
Output
Output typeNPN or PNP; NO, NC or NO+NC (NO+NC 4-wire for M12, M18 and M30)
Electrical
Supply voltage10–30 V DC
Load current≤200 mA (M12, M18, M30); ≤150 mA (M8)
Supply current≤15 mA (M12, M18, M30); ≤10 mA (M8)
Residual voltage≤2.5 V
ProtectionShort-circuit, overload and reverse polarity
Output indicatorYellow LED
Dielectric strength1000 V AC 50/60 Hz, 60 s (M12, M18, M30)
Insulation resistance≥50 MΩ (500 V DC) (M18)
Environmental
Ambient temperature−25 to +70 °C
Operating humidity35–95% RH (M18)
Vibration resistance10–50 Hz, 1.5 mm (M18)
Ingress protectionIP67
Mechanical
Housing materialNickel-copper alloy (M12, M18, M30); stainless steel (M8)
DimensionsCable versions, flush / non-flush: M8×40 / 43 mm; M12×51 / 55 mm; M18×51.5 / 59.5 mm; M30×52 / 64 mm
Electrical connection2 m PVC cable or M12 connector (M8 size: also M8 connector)

Dimensions and wiring

Drawing 1 for DW-PX
Drawing 2 for DW-PX

Questions about the DW-PX

What output signal or interface does the DW-PX use?

The output of the DW-PX (Inductive Proximity Sensor) is NPN or PNP; NO, NC or NO+NC (NO+NC 4-wire for M12, M18 and M30).

What is the IP rating of the DW-PX?

The DW-PX (Inductive Proximity Sensor) has an ingress protection rating of IP67.

What supply voltage does the DW-PX need?

The DW-PX (Inductive Proximity Sensor) is powered by 10–30 V DC.

What is the thread specification of the DW-PX?

The DW-PX (Inductive Proximity Sensor) is specified with a thread specification of M8 / M12 / M18 / M30.

Where can I get the DW-PX datasheet?

The DW-PX datasheet is a free PDF on this page, with the full specification table. For drawings in CAD format or a custom version, contact DWIN sales.

Does DWIN offer OEM or custom versions of the DW-PX?

Yes. DWIN adapts the DW-PX from its existing design: housing and mounting, cable and connector, interface and protocol, firmware and range. Engineering confirms feasibility, then DWIN builds samples for your tests before series production.

How do I get a quote or samples of the DW-PX?

Use the quote form on this page or email xyx@gzdwin.com with the DW-PX, your quantity, application and destination country. DWIN sales replies with pricing, lead time and sample availability.

Ask about the DW-PX

Send your application, quantity and interface. We reply with pricing, lead time and sample availability.

Request a quote