DW-DWS Draw-Wire Displacement Sensor, RS485 plus 4–20mA, 0–5V or 0–10V, up to 20 m

DW-DWS

Draw-Wire Displacement Sensor, RS485 plus 4–20mA, 0–5V or 0–10V, up to 20 m

Absolute draw-wire displacement sensor with power-off memory, 0.5 to 20 m measuring ranges and RS485 (Modbus RTU) plus a 4–20 mA, 0–5 V or 0–10 V output, in an aluminium housing with IP54 as standard and IP68 as an option.

Range
0.5–20 m
Output
RS485 + 4–20 mA, 0–5 V or 0–10 V
Non-linearity
±0.1% FS

Features

  • Absolute magnetic encoder with power-off memory
  • Dual output: RS485 (Modbus RTU) plus 4–20 mA, 0–5 V or 0–10 V
  • Ceramic wire outlet for wear resistance
  • Nylon-coated Ø0.8 mm stainless steel wire
  • Pull head tolerates 15° of angular misalignment
  • Teach wires for minimum, maximum and midpoint; settable direction
  • IP54 standard, IP68 optional; explosion-proof version available on request

Typical applications

  • AGVs
  • Industrial trucks and commercial vehicles
  • Packaging machines
  • Logistics
  • Agricultural and forestry machinery
  • Construction and mining equipment

Full specifications

PDF DW-DWS Datasheet EN
DW-DWS specifications as published. Values are typical unless stated.
Performance
Measuring range0.5, 1, 2, 3, 4, 5, 6, 7, 8, 9 or 10 m; 11–15 m; 16–20 m
Sensing elementAbsolute magnetic encoder with power-off memory
Resolution1024 or 4096 PPR (default 4096), e.g. 0.0244 mm at 4096 PPR on 0.5–1 m ranges
Non-linearity±0.1% FS
Repeatability±0.3% FS
Refresh cycle< 50 µs
Output
Output signalRS485 (Modbus RTU) + 4–20 mA / 0–5 V / 0–10 V
Baud rate9600–115200 (default 9600)
Device address1–255 (default 1)
Electrical
Supply voltage5–24 V DC; 12–24 V DC for analog outputs
Operating currentMax. 100 mA
Electrical life> 100,000 h
Mechanical
WireØ0.8 mm AISI 304 stainless steel, nylon coated
Pull-out force2–30 N depending on range
Maximum wire speed1 m/s
Wire breaking forceTyp. 330 N
Housing materialAluminium alloy (anti-static surface); stainless steel pull head
WeightApprox. 0.5 kg
Electrical connectionConnector or cable (1–1.2 m)
Mechanical life> 5 million cycles
Environmental
Ingress protectionIP54 (standard); IP68 (optional)
Operating temperature−40 to +85 °C
Shock50 g, 11 ms, 100 shocks per axis
Vibration10–500 Hz, 10 g, 2 h per axis
Hazardous-area versionExplosion-proof version available on request

Questions about the DW-DWS

What is the measuring range of the DW-DWS?

The DW-DWS (Draw-Wire Displacement Sensor) has a measuring range of 0.5–20 m.

What output signal or interface does the DW-DWS use?

The output of the DW-DWS (Draw-Wire Displacement Sensor) is RS485 + 4–20 mA, 0–5 V or 0–10 V.

What is the IP rating of the DW-DWS?

The DW-DWS (Draw-Wire Displacement Sensor) has an ingress protection rating of IP54 (standard); IP68 (optional).

What supply voltage does the DW-DWS need?

The DW-DWS (Draw-Wire Displacement Sensor) is powered by 5–24 V DC; 12–24 V DC for analog outputs.

What is the DW-DWS used for?

The DW-DWS (Draw-Wire Displacement Sensor) is typically used for AGVs, industrial trucks and commercial vehicles, packaging machines, logistics, and agricultural and forestry machinery.

Where can I get the DW-DWS datasheet?

The DW-DWS datasheet is a free PDF on this page, with the full specification table. For drawings in CAD format or a custom version, contact DWIN sales.

Does DWIN offer OEM or custom versions of the DW-DWS?

Yes. DWIN adapts the DW-DWS from its existing design: housing and mounting, cable and connector, interface and protocol, firmware and range. Engineering confirms feasibility, then DWIN builds samples for your tests before series production.

How do I get a quote or samples of the DW-DWS?

Use the quote form on this page or email xyx@gzdwin.com with the DW-DWS, your quantity, application and destination country. DWIN sales replies with pricing, lead time and sample availability.

Ask about the DW-DWS

Send your application, quantity and interface. We reply with pricing, lead time and sample availability.

Request a quote