DW-ENC Absolute Magnetic Rotary Encoder, Ø58 mm, EtherCAT

DW-ENC

Absolute Magnetic Rotary Encoder, Ø58 mm, EtherCAT

Ø58 mm magnetic absolute rotary encoder, single-turn up to 16-bit and multi-turn up to 14-bit, with an EtherCAT interface (CANopen over EtherCAT), solid or blind hollow shaft, 10–30 V DC supply and three M12 connectors.

Resolution
16-bit single-turn, 14-bit multi-turn
Electrical interface
EtherCAT
Protection
IP65 or IP66 (IP67 optional)

Features

  • Magnetic absolute sensing, single-turn or multi-turn
  • EtherCAT interface, CoE profile (DS-301 and DS-406), 100 Mbit/s
  • Single-turn resolution up to 16-bit, multi-turn up to 14-bit
  • Solid shaft with clamping or synchro flange, or blind hollow shaft
  • Aluminium housing, stainless steel housing optional
  • Reverse polarity, short-circuit, lightning and ESD protection
  • Explosion-proof version available on request

Typical applications

  • Industrial automation
  • Machinery
  • Material handling
  • Process equipment
  • Energy systems
  • Position and speed feedback in motion control

Full specifications

PDF DW-ENC Datasheet EN
DW-ENC specifications as published. Values are typical unless stated.
Performance
TypeMagnetic absolute encoder, single-turn or multi-turn
Single-turn resolution12-bit (4096), 13-bit (8192) or 16-bit (65536)
Multi-turn resolution12-bit (4096 turns) standard, 14-bit (16384 turns) max.
Output codeBinary
FunctionsProgrammable resolution, preset and counting direction
DiagnosticsOpto-ASIC, memory, LED
Output
Electrical interfaceEtherCAT
Network protocolCoE (CANopen over EtherCAT, DS-301 + DS-406)
Communication speed10/100 Mbit/s
Interface cycle time≥62.5 µs
Electrical
Supply voltage10–30 V DC
Power consumption≤2.5 W
Start time< 1 s
ProtectionReverse polarity, short-circuit, lightning and ESD
Electrical connection3 × M12 connector, radial or axial exit
Mechanical
Housing diameterØ58 mm
Shaft typeSolid shaft (clamping or synchro flange) or blind hollow shaft
Shaft diameterØ6, 8, 10, 12, 14 or 15 mm (others to order)
Housing materialAluminium (stainless steel optional)
Maximum speed6000 rpm
Shaft loadRadial 200 N, axial 100 N
Starting torque< 0.05 Nm
Environmental
Ingress protectionIP65 or IP66 (IP67 optional)
Operating temperature−30 to +85 °C (−40 to +85 °C on request)
Storage temperature−40 to +100 °C
Shock1000 m/s² (100 g), 6 ms
Vibration20 g
Hazardous-area versionExplosion-proof version available on request

Dimensions and wiring

Drawing 1 for DW-ENC
Drawing 2 for DW-ENC

Questions about the DW-ENC

What is the IP rating of the DW-ENC?

The DW-ENC (Absolute Magnetic Rotary Encoder) has an ingress protection rating of IP65 or IP66 (IP67 optional).

What supply voltage does the DW-ENC need?

The DW-ENC (Absolute Magnetic Rotary Encoder) is powered by 10–30 V DC.

What is the resolution of the DW-ENC?

The DW-ENC (Absolute Magnetic Rotary Encoder) is specified with a resolution of 16-bit single-turn, 14-bit multi-turn.

What is the electrical interface of the DW-ENC?

The DW-ENC (Absolute Magnetic Rotary Encoder) is specified with a electrical interface of EtherCAT.

What is the DW-ENC used for?

The DW-ENC (Absolute Magnetic Rotary Encoder) is typically used for industrial automation, machinery, material handling, process equipment, and energy systems.

Where can I get the DW-ENC datasheet?

The DW-ENC datasheet is a free PDF on this page, with the full specification table. For drawings in CAD format or a custom version, contact DWIN sales.

Does DWIN offer OEM or custom versions of the DW-ENC?

Yes. DWIN adapts the DW-ENC from its existing design: housing and mounting, cable and connector, interface and protocol, firmware and range. Engineering confirms feasibility, then DWIN builds samples for your tests before series production.

How do I get a quote or samples of the DW-ENC?

Use the quote form on this page or email xyx@gzdwin.com with the DW-ENC, your quantity, application and destination country. DWIN sales replies with pricing, lead time and sample availability.

Ask about the DW-ENC

Send your application, quantity and interface. We reply with pricing, lead time and sample availability.

Request a quote