DW-MLT Magnetostrictive Linear Position Sensor, 50 to 2000 mm, Analog, RS485 or SSI

DW-MLT

Magnetostrictive Linear Position Sensor, 50 to 2000 mm, Analog, RS485 or SSI

Magnetostrictive linear position sensor with a pressure-resistant 316 stainless steel rod for hydraulic cylinders, 50 to 2000 mm stroke, absolute 4–20 mA, voltage, RS485 or SSI output, a 24 V DC supply and IP67.

Range
50–2000 mm
Output
4–20 mA, 0–10 V, RS485 or SSI
Protection
IP67

Features

  • Non-contact magnetostrictive measurement, no wear
  • Absolute output: no re-homing after a power loss
  • Pressure-resistant stainless steel rod for mounting in hydraulic cylinders
  • 4–20 mA, 0–5 V, 0–10 V, RS485 (Modbus) or SSI output
  • LED fault indication
  • Low power consumption and low temperature drift

Typical applications

  • Hydraulic cylinder piston position
  • Wind turbine pitch adjustment
  • Brake control systems
  • Rail distance detection
  • Metallurgical and port machinery
  • Construction, rubber and injection moulding machines

Full specifications

PDF DW-MLT Datasheet EN
DW-MLT specifications as published. Values are typical unless stated.
Performance
Measuring range50 to 2000 mm
Non-linearity1%–0.5% FS (50–100 mm); 0.5%–0.1% FS (100–300 mm); 0.1%–0.05% FS (300–2000 mm)
Repeatability±0.008% FS
Resolution16-bit D/A
Data update0.5 ms (stroke < 1000 mm); 1.0 ms (stroke < 2000 mm), analog
Temperature coefficient< 0.007% FS/°C
Output
Output signal (current)4–20 mA or 20–4 mA (load 0–500 Ω)
Output signal (voltage)0–5 V, 5–0 V, 0–10 V or 10–0 V DC (load > 5 kΩ)
Digital outputRS485 (Modbus) or SSI (Gray code or binary)
SSI data length24, 25 or 26 bit (24 data bits, 25th parity bit, 26th alarm bit)
SSI baud rate100–1000 kBd
Electrical
Supply voltage24 V DC (−15% to +20%)
Operating current< 70 mA
Reverse voltageMax. −30 V DC
OvervoltageMax. 33 V DC
Electrical connectionStraight cable outlet, or 6-pin or 7-pin aviation plug
Mechanical
Thread specificationM18×1.5 (M20×1.5 or 3/4"-16UNF-3A optional)
Rod material316 stainless steel, Ø10 mm
Housing material304 stainless steel
Rod pressure rating≤34 MPa
Position magnetRing magnet Ø33 mm with 4 × Ø4 mm holes; floats for level measurement
DimensionsHexagonal housing 49 × 44 mm, 75 mm long; null zone 50.8 mm; end dead zone 63.5 mm
Environmental
Operating temperature−40 to +85 °C
Storage temperature−40 to +100 °C
Ingress protectionIP67 (straight cable or 6-pin plug; 7-pin plug not waterproof)

Dimensions and wiring

Drawing 1 for DW-MLT
Drawing 2 for DW-MLT

Questions about the DW-MLT

What is the measuring range of the DW-MLT?

The DW-MLT (Magnetostrictive Linear Position Sensor) has a measuring range of 50–2000 mm.

What output signal or interface does the DW-MLT use?

The output of the DW-MLT (Magnetostrictive Linear Position Sensor) is 4–20 mA or 20–4 mA (load 0–500 Ω) (current); 0–5 V, 5–0 V, 0–10 V or 10–0 V DC (load > 5 kΩ) (voltage).

What is the IP rating of the DW-MLT?

The DW-MLT (Magnetostrictive Linear Position Sensor) has an ingress protection rating of IP67.

What supply voltage does the DW-MLT need?

The DW-MLT (Magnetostrictive Linear Position Sensor) is powered by 24 V DC (−15% to +20%).

What is the DW-MLT used for?

The DW-MLT (Magnetostrictive Linear Position Sensor) is typically used for hydraulic cylinder piston position, wind turbine pitch adjustment, brake control systems, rail distance detection, and metallurgical and port machinery.

Where can I get the DW-MLT datasheet?

The DW-MLT datasheet is a free PDF on this page, with the full specification table. For drawings in CAD format or a custom version, contact DWIN sales.

Does DWIN offer OEM or custom versions of the DW-MLT?

Yes. DWIN adapts the DW-MLT from its existing design: housing and mounting, cable and connector, interface and protocol, firmware and range. Engineering confirms feasibility, then DWIN builds samples for your tests before series production.

How do I get a quote or samples of the DW-MLT?

Use the quote form on this page or email xyx@gzdwin.com with the DW-MLT, your quantity, application and destination country. DWIN sales replies with pricing, lead time and sample availability.

Ask about the DW-MLT

Send your application, quantity and interface. We reply with pricing, lead time and sample availability.

Request a quote