DW-RLT
80 GHz Radar Level Transmitter, 4–20mA plus RS485, up to 20 m
Compact 80 GHz non-contact radar level transmitter with an 8° beam, 0.2 to 20 m range and ±10 mm accuracy, 4–20 mA, 0–5 V or 0–10 V plus RS485 (Modbus RTU), a G1½ thread and IP67 (IP68 optional), for water, wastewater and fuel tanks.
- Range
- 0.2–20 m
- Accuracy
- ±10 mm
- Output
- 4–20 mA or voltage + RS485
Features
- 80 GHz mmWave radar, non-contact measurement
- Little affected by condensation, rain, vapour or corrosion
- Not affected by changes in dielectric constant or density
- 4–20 mA, 0–5 V or 0–10 V plus RS485, or RS485 only
- Low-power 3.3–5.5 V DC version with RS485
- Bubble level on top for alignment, no on-site calibration
- Water and fuel versions
Typical applications
Full specifications
PDF DW-RLT Datasheet| Performance | |
|---|---|
| Measuring principle | 80 GHz mmWave radar, non-contact |
| Center frequency | 80 GHz |
| Operating frequency band | 76–81 GHz |
| Measuring range | 0.2–10 m; 0.2–20 m (above 10 m only with 4–20 mA + RS485 and 12–30 V DC supply) |
| Accuracy | ±10 mm (typical); ±5 mm (on request) |
| Analog output accuracy | 0.25% FS (typical); 0.1% FS (on request) |
| Beam angle | 8° |
| Output | |
| Output signal | 12–30 V DC version: 4–20 mA / 0–5 V / 0–10 V + RS485 (Modbus RTU), or RS485 only; 3.3–5.5 V DC version: RS485 (Modbus RTU) |
| Baud rate | 9600 bit/s (default) |
| Electrical | |
| Power supply | 12–30 V DC (standard); 3.3–5.5 V DC (low-power version) |
| Power consumption | 0.72 W (12 V × 0.06 A) to 1.2 W (30 V × 0.04 A); low-power version 0.067–0.65 W |
| Wiring | Red U+, black U−, green RS485 A, blue RS485 B, yellow analog output |
| Mechanical | |
| Process connection | G1½ thread (antenna side); G1 thread at the cable end |
| Dimensions | Ø76 × 131.5 mm |
| Housing material | PA6 nylon + glass fibre |
| Wetted material | PVDF (anti-corrosion version) |
| Cable length | 1 m, 2 m or to order |
| Environmental | |
| Operating pressure | −1 to 3 bar |
| Operating temperature | −40 to +85 °C |
| Ingress protection | IP67 (standard); IP68 (3 bar) optional |
Dimensions and wiring
Questions about the DW-RLT
What is the measuring range of the DW-RLT?
The DW-RLT (80 GHz Radar Level Transmitter) has a measuring range of 0.2–20 m.
How accurate is the DW-RLT?
The DW-RLT (80 GHz Radar Level Transmitter) is specified with an accuracy of ±10 mm.
What output signal or interface does the DW-RLT use?
The output of the DW-RLT (80 GHz Radar Level Transmitter) is 4–20 mA or voltage + RS485.
What is the IP rating of the DW-RLT?
The DW-RLT (80 GHz Radar Level Transmitter) has an ingress protection rating of IP67 (standard); IP68 (3 bar) optional.
What is the DW-RLT used for?
The DW-RLT (80 GHz Radar Level Transmitter) is typically used for water and wastewater treatment, hydrological monitoring of rivers and channels, water and fuel tanks, oil, gas, chemical and petrochemical storage tanks, and pharmaceutical, food and beverage plants.
Where can I get the DW-RLT datasheet?
The DW-RLT datasheet is a free PDF on this page, with the full specification table. For drawings in CAD format or a custom version, contact DWIN sales.
Does DWIN offer OEM or custom versions of the DW-RLT?
Yes. DWIN adapts the DW-RLT from its existing design: housing and mounting, cable and connector, interface and protocol, firmware and range. Engineering confirms feasibility, then DWIN builds samples for your tests before series production.
How do I get a quote or samples of the DW-RLT?
Use the quote form on this page or email xyx@gzdwin.com with the DW-RLT, your quantity, application and destination country. DWIN sales replies with pricing, lead time and sample availability.