DW-CLP
Capacitive Level Transmitter, 4–20mA, HART or RS485, up to 10 m
Capacitive level transmitter for liquids, oils, powders and granular solids, with 0.1 to 10 m range, 4–20 mA, 4–20 mA with HART or RS485 output, flange, clamp or threaded mounting, an optional LCD display and IP66.
- Range
- 0.1–10 m
- Output
- 4–20 mA, HART or RS485
- Protection
- IP66
Features
- For liquids, oils, solids, powders and granular media
- 4–20 mA, 4–20 mA with HART, or RS485 output
- Flange, clamp or threaded connection; insertion depth to order
- Optional LCD display
- Stainless steel construction; probe for up to 260 °C optional
- Explosion-proof version available on request
Typical applications
Full specifications
PDF DW-CLP Datasheet| Performance | |
|---|---|
| Measuring principle | Capacitive |
| Measuring range | 0.1–10 m |
| Capacitance range | 10–5000 pF |
| Accuracy | 0.2% / 0.5% / 1% FS |
| Temperature drift | ≤0.01% FS/°C |
| Long-term stability | ≤0.1% FS/year |
| Output | |
| Output signal | 4–20 mA / 4–20 mA + HART / RS485 |
| Display | Optional LCD display |
| Electrical | |
| Power supply | 15–36 V DC |
| Mechanical | |
| Installation method | Flange, clamp or thread; insertion depth to order |
| Material | 316 stainless steel / 1Cr18Ni9Ti / PTFE |
| Environmental | |
| Operating pressure | −0.1 to 16 MPa |
| Medium temperature | −50 to +260 °C (optional) |
| Ambient temperature | −40 to +80 °C |
| Ingress protection | IP66 |
| Hazardous-area version | Explosion-proof version available on request |
Questions about the DW-CLP
What is the measuring range of the DW-CLP?
The DW-CLP (Capacitive Level Transmitter) has a measuring range of 0.1–10 m.
How accurate is the DW-CLP?
The DW-CLP (Capacitive Level Transmitter) is specified with an accuracy of 0.2% / 0.5% / 1% FS.
What output signal or interface does the DW-CLP use?
The output of the DW-CLP (Capacitive Level Transmitter) is 4–20 mA, HART or RS485.
What is the IP rating of the DW-CLP?
The DW-CLP (Capacitive Level Transmitter) has an ingress protection rating of IP66.
What is the DW-CLP used for?
The DW-CLP (Capacitive Level Transmitter) is typically used for water supply and treatment tanks and reservoirs, hydropower, petroleum storage tanks, chemical processing, and silos for powders, grain and pellets.
Where can I get the DW-CLP datasheet?
The DW-CLP datasheet is a free PDF on this page, with the full specification table. For drawings in CAD format or a custom version, contact DWIN sales.
Does DWIN offer OEM or custom versions of the DW-CLP?
Yes. DWIN adapts the DW-CLP from its existing design: housing and mounting, cable and connector, interface and protocol, firmware and range. Engineering confirms feasibility, then DWIN builds samples for your tests before series production.
How do I get a quote or samples of the DW-CLP?
Use the quote form on this page or email xyx@gzdwin.com with the DW-CLP, your quantity, application and destination country. DWIN sales replies with pricing, lead time and sample availability.