DW-FLS
Cable Float Level Switch for Pump Control, IP68
Cable-suspended float switch with a micro switch (NO/NC) that starts and stops pumps as a tank fills or drains, with 250 V AC contacts rated up to 12 A, 2 to 10 m of 0.5 to 1 mm² cable, a sealed polypropylene float and IP68.
- Rated current
- 4 / 8 / 12 A at 250 V AC
- Cable length
- 2–10 m
- Protection
- IP68
Features
- Micro switch with NO/NC contacts for filling or draining
- Switches pumps of up to 1.5 kW directly (1 mm² cable)
- Silver contacts with low contact resistance
- Injection-moulded, sealed polypropylene float, IP68
- For water, wastewater and mildly acidic or alkaline liquids
- Optional SUS304 or SUS316 stainless steel counterweight
Typical applications
Full specifications
PDF DW-FLS Datasheet| Performance | |
|---|---|
| Type | Cable float switch with 3-wire micro switch (NO/NC) |
| Switching angle | Drainage: 40°; filling: −55° (±5°) |
| Minimum control range | ≥0.3 m |
| Float density | 0.69 g/cm³ (without cable) |
| Electrical | |
| Rated voltage | 250 V AC / 400 V AC |
| Rated current | 4 A / 8 A / 12 A |
| Maximum pump power | 750 W (0.5 mm²), 1000 W (0.75 mm²), 1500 W (1 mm²) |
| Full-load power | 880 W (0.5 mm²), 1320 W (0.75 mm²), 1760 W (1 mm²) |
| Thermal current | 10 A / 16 A (250 V) |
| Electrical life | ≥110,000 operations |
| Insulation resistance | ≥100 MΩ |
| Dielectric strength | 1500 V, 1 min |
| Wiring | Black or yellow-green: common; brown: drainage; blue: filling |
| Mechanical | |
| Housing material | Polypropylene (PP), injection-moulded seal |
| Cable specification | 3 × 0.5 / 0.75 / 1.0 mm² oxygen-free copper; PVC, rubber or silicone sheath |
| Cable length | 2 / 3 / 4 / 5 / 10 m (others to order) |
| Dimensions | 161 × 80 × 43 mm (float with cable gland) |
| Environmental | |
| Ingress protection | IP68 |
| Operating temperature | 0 to +70 °C |
| Maximum operating pressure | ≤0.3 MPa |
Dimensions and wiring
Questions about the DW-FLS
What is the IP rating of the DW-FLS?
The DW-FLS (Cable Float Level Switch for Pump Control) has an ingress protection rating of IP68.
What is the rated current of the DW-FLS?
The DW-FLS (Cable Float Level Switch for Pump Control) is specified with a rated current of 4 / 8 / 12 A at 250 V AC.
What is the cable length of the DW-FLS?
The DW-FLS (Cable Float Level Switch for Pump Control) is specified with a cable length of 2–10 m.
What is the operating temperature range of the DW-FLS?
The DW-FLS (Cable Float Level Switch for Pump Control) is specified for operating temperatures of 0 to +70 °C.
What is the DW-FLS used for?
The DW-FLS (Cable Float Level Switch for Pump Control) is typically used for water supply systems, tanks, water towers and reservoirs, industrial pump control, irrigation systems, and sewage and drainage systems.
Where can I get the DW-FLS datasheet?
The DW-FLS datasheet is a free PDF on this page, with the full specification table. For drawings in CAD format or a custom version, contact DWIN sales.
Does DWIN offer OEM or custom versions of the DW-FLS?
Yes. DWIN adapts the DW-FLS from its existing design: housing and mounting, cable and connector, interface and protocol, firmware and range. Engineering confirms feasibility, then DWIN builds samples for your tests before series production.
How do I get a quote or samples of the DW-FLS?
Use the quote form on this page or email xyx@gzdwin.com with the DW-FLS, your quantity, application and destination country. DWIN sales replies with pricing, lead time and sample availability.