DW-VT Vibration and Temperature Transmitter, 4–20mA, 0–5V or 0–10V

DW-VT

Vibration and Temperature Transmitter, 4–20mA, 0–5V or 0–10V

Vibration transmitter that measures vibration velocity (RMS) and surface temperature on motors, pumps, fans and gearboxes, with a 4–20 mA, 0–5 V or 0–10 V output, a 10–30 V DC supply and a 304 stainless steel housing for threaded or magnetic mounting.

Velocity range
0–50 mm/s (0–199.9 mm/s version)
Output
4–20 mA, 0–5 V or 0–10 V
Protection
IP67

Features

  • Measures vibration velocity (RMS) and surface temperature
  • MEMS vibration chip with embedded temperature sensing
  • 4–20 mA, 0–5 V or 0–10 V output to a PLC or DCS
  • Three frequency ranges: 10–1600 Hz, 10–5000 Hz or 10–12000 Hz
  • 10–30 V DC wide-range supply
  • Small 304 stainless steel housing, threaded or magnetic mounting
  • Factory calibrated, no recalibration needed

Typical applications

  • Motors and generators
  • Gearboxes
  • Fans and air compressors
  • Centrifuges
  • Pumps and submersible pumps
  • Mining, chemical, metallurgy and power plants

Full specifications

PDF DW-VT Datasheet EN
DW-VT specifications as published. Values are typical unless stated.
Performance
Measured variableVibration velocity (RMS) and surface temperature
Velocity range0–50 mm/s (10–1600 Hz and 10–5000 Hz versions); 0–199.9 mm/s (10–12000 Hz version)
Velocity accuracy±1.5% FS (at 1 kHz, 10 mm/s)
Frequency response10–1600 Hz / 10–5000 Hz / 10–12000 Hz (by version)
Measuring directionZ axis (perpendicular to the mounting surface), single axis
Temperature measuring range−40 to +80 °C (surface)
Temperature accuracy±2 °C (surface at 60 °C, ambient 25 °C, with thermal grease and insulating sleeve)
Output
Output signal4–20 mA / 0–5 V / 0–10 V
Output loadCurrent output ≤600 Ω; voltage output ≤250 Ω
Electrical
Power supply10–30 V DC
Power consumptionMax. 1.2 W
Mechanical
Housing material304 stainless steel
Installation methodThreaded stud (M5×0.8, M8×1.25; M10×1.5 or 1/4" with adapter) or magnetic base
Environmental
Operating temperature−40 to +80 °C
Operating humidity0–80% RH
Contact surface temperature−40 to +150 °C (default 85 °C)
Ingress protectionIP67

Questions about the DW-VT

What is the measuring range of the DW-VT?

The DW-VT (Vibration and Temperature Transmitter) has a measuring range of −40 to +80 °C (surface).

What output signal or interface does the DW-VT use?

The output of the DW-VT (Vibration and Temperature Transmitter) is 4–20 mA, 0–5 V or 0–10 V.

What is the IP rating of the DW-VT?

The DW-VT (Vibration and Temperature Transmitter) has an ingress protection rating of IP67.

What supply voltage does the DW-VT need?

The DW-VT (Vibration and Temperature Transmitter) is powered by 10–30 V DC.

What is the DW-VT used for?

The DW-VT (Vibration and Temperature Transmitter) is typically used for motors and generators, gearboxes, fans and air compressors, centrifuges, and pumps and submersible pumps.

Where can I get the DW-VT datasheet?

The DW-VT datasheet is a free PDF on this page, with the full specification table. For drawings in CAD format or a custom version, contact DWIN sales.

Does DWIN offer OEM or custom versions of the DW-VT?

Yes. DWIN adapts the DW-VT from its existing design: housing and mounting, cable and connector, interface and protocol, firmware and range. Engineering confirms feasibility, then DWIN builds samples for your tests before series production.

How do I get a quote or samples of the DW-VT?

Use the quote form on this page or email xyx@gzdwin.com with the DW-VT, your quantity, application and destination country. DWIN sales replies with pricing, lead time and sample availability.

Ask about the DW-VT

Send your application, quantity and interface. We reply with pricing, lead time and sample availability.

Request a quote