DW-VS Electronic Vibration Switch, Two Alarm Relays and 4–20mA Output

DW-VS

Electronic Vibration Switch, Two Alarm Relays and 4–20mA Output

Self-contained electronic vibration switch that monitors vibration velocity from 0 to 50 mm/s (RMS) on rotating machines, with two relay alarms with adjustable delay, a 4–20 mA output, AC or DC supply and an IP65 housing.

Measuring range
0–50 mm/s RMS
Relay output
2 alarm relays
Output
4–20 mA

Features

  • Self-contained: no separate vibration sensor needed
  • Raises an alarm or stops the machine when vibration exceeds the set limit
  • Two independent alarm set points with normally open relay contacts
  • Simultaneous 4–20 mA vibration velocity output
  • Alarm delay adjustable from 1 to 9 s
  • Versions with 3-digit LED display and push-button setting
  • Explosion-proof version available on request

Typical applications

  • Motors
  • Centrifuges
  • Fans
  • Pumps

Full specifications

PDF DW-VS Datasheet EN
DW-VS specifications as published. Values are typical unless stated.
Performance
Measuring range0–50 mm/s (RMS)
Resolution0.1 mm/s
Frequency response5–400 Hz (−3 dB)
Accuracy±2% (linearity at 30 Hz)
Measuring directionPerpendicular to the mounting surface
Display3-digit 0.36" LED display (display and explosion-proof versions)
Output
Output signal4–20 mA, accuracy ≤±1%, load ≤400 Ω
Relay output2 high alarms, normally open contacts, 3 A / 250 V AC, 28 V DC
Alarm indicationAlarm I and Alarm II, red LEDs
Alarm delay3 s default, settable 1–9 s
Electrical
Power supply100–260 V AC or 24 V DC ±4 V
Power consumption≤3 W
Environmental
Operating temperature0 to +50 °C
Operating humidity20–90% RH
Ingress protectionIP65
Hazardous-area versionExplosion-proof version available on request
Mechanical
Dimensions77 × 140 mm, height 92 mm
Installation method3 × M6 × 15 mm screws on a 116 mm equilateral triangle
WeightApprox. 1.5 kg

Questions about the DW-VS

What is the measuring range of the DW-VS?

The DW-VS (Electronic Vibration Switch) has a measuring range of 0–50 mm/s (RMS).

How accurate is the DW-VS?

The DW-VS (Electronic Vibration Switch) is specified with an accuracy of ±2% (linearity at 30 Hz).

What output signal or interface does the DW-VS use?

The output of the DW-VS (Electronic Vibration Switch) is 4–20 mA.

What is the IP rating of the DW-VS?

The DW-VS (Electronic Vibration Switch) has an ingress protection rating of IP65.

What is the DW-VS used for?

The DW-VS (Electronic Vibration Switch) is typically used for motors, centrifuges, fans, and pumps.

Where can I get the DW-VS datasheet?

The DW-VS datasheet is a free PDF on this page, with the full specification table. For drawings in CAD format or a custom version, contact DWIN sales.

Does DWIN offer OEM or custom versions of the DW-VS?

Yes. DWIN adapts the DW-VS from its existing design: housing and mounting, cable and connector, interface and protocol, firmware and range. Engineering confirms feasibility, then DWIN builds samples for your tests before series production.

How do I get a quote or samples of the DW-VS?

Use the quote form on this page or email xyx@gzdwin.com with the DW-VS, your quantity, application and destination country. DWIN sales replies with pricing, lead time and sample availability.

Ask about the DW-VS

Send your application, quantity and interface. We reply with pricing, lead time and sample availability.

Request a quote