DW-TL Single- or Dual-Axis Inclinometer, RS485, 4–20mA or CANopen, up to ±90°

DW-TL

Single- or Dual-Axis Inclinometer, RS485, 4–20mA or CANopen, up to ±90°

Temperature-compensated inclinometer for one or two axes, with ranges from ±10° to ±90°, RS232, RS485, RS422 or TTL, 4–20 mA or CANopen output, a 9–36 V DC supply and an IP67 housing of 92 × 48 × 36 mm.

Range
±10° to ±90°
Output
RS485, 4–20 mA or CANopen
Protection
IP67

Features

  • Single-axis (X) or dual-axis (XY) tilt measurement
  • Full temperature compensation from −40 to +85 °C
  • Built-in 24-bit A/D converter
  • RS232, RS485, RS422 or TTL; 4–20 mA; or CANopen output
  • Wide 9–36 V DC supply
  • Waterproof aviation connector, IP67
  • 4–20 mA output for cable runs of up to 2 km

Typical applications

  • Levelling of construction vehicles
  • Bridge and dam monitoring
  • Positioning of laser equipment
  • Angle control in medical devices
  • Attitude of underground drilling rigs
  • Tilt monitoring of geological equipment

Full specifications

PDF DW-TL Datasheet EN
DW-TL specifications as published. Values are typical unless stated.
Performance
AxesSingle axis (X) or dual axis (XY)
Measuring range±10° / ±30° / ±60° / ±90° (CANopen version: up to ±60°)
Resolution0.001° (RS485, CANopen); 0.0007° (4–20 mA)
Accuracy at 25°C0.003° (±10°) / 0.01° (±30°) / 0.02° (±60°) / 0.03° (±90°)
Zero temperature coefficient±0.0004 °/°C (digital); 0.0005 °/°C (4–20 mA), −40 to +85 °C
Sensitivity temperature coefficient≤50 ppm/°C (≤100 ppm/°C at ±90°, RS485 version)
Response frequency20 Hz
Power-on time0.5 s
Output
Output signalRS232 / RS485 / RS422 / TTL; 4–20 mA (12 mA at 0°); CANopen
Communication protocolModbus (digital versions); CANopen (CANopen version)
Output rate5 / 15 / 35 / 50 Hz settable (RS485); 10 / 20 Hz settable (CANopen)
Electrical
Supply voltage9–36 V DC (digital and CANopen versions); 11.5–36 V DC (4–20 mA)
Operating current50 mA without load (CANopen version)
Insulation resistance≥100 MΩ
Environmental
Operating temperature−40 to +85 °C
Storage temperature−40 to +85 °C
Ingress protectionIP67
Shock100 g at 11 ms, 3 axes (half sine)
Vibration10 grms, 10–1000 Hz
MTBF≥98,000 h
Mechanical
Dimensions92 × 48 × 36 mm
Mounting hole spacing82 × 38 mm; 4 × M4 screws, 2 × M3 positioning pins
Electrical connectionWaterproof aviation connector; 2 m shielded cable as standard
Weight≤220 g (RS485), 235 g (CANopen), ≤260 g (4–20 mA), without cable

Questions about the DW-TL

What is the measuring range of the DW-TL?

The DW-TL (Single- or Dual-Axis Inclinometer) has a measuring range of ±10° to ±90°.

How accurate is the DW-TL?

The DW-TL (Single- or Dual-Axis Inclinometer) is specified with an accuracy of 0.003° (±10°) / 0.01° (±30°) / 0.02° (±60°) / 0.03° (±90°).

What output signal or interface does the DW-TL use?

The output of the DW-TL (Single- or Dual-Axis Inclinometer) is RS485, 4–20 mA or CANopen.

What is the IP rating of the DW-TL?

The DW-TL (Single- or Dual-Axis Inclinometer) has an ingress protection rating of IP67.

What is the DW-TL used for?

The DW-TL (Single- or Dual-Axis Inclinometer) is typically used for levelling of construction vehicles, bridge and dam monitoring, positioning of laser equipment, angle control in medical devices, and attitude of underground drilling rigs.

Where can I get the DW-TL datasheet?

The DW-TL datasheet is a free PDF on this page, with the full specification table. For drawings in CAD format or a custom version, contact DWIN sales.

Does DWIN offer OEM or custom versions of the DW-TL?

Yes. DWIN adapts the DW-TL from its existing design: housing and mounting, cable and connector, interface and protocol, firmware and range. Engineering confirms feasibility, then DWIN builds samples for your tests before series production.

How do I get a quote or samples of the DW-TL?

Use the quote form on this page or email xyx@gzdwin.com with the DW-TL, your quantity, application and destination country. DWIN sales replies with pricing, lead time and sample availability.

Ask about the DW-TL

Send your application, quantity and interface. We reply with pricing, lead time and sample availability.

Request a quote