DW-ULT
Ultrasonic Level Transmitter, 4–20mA or 0–5V plus RS485, up to 15 m
Non-contact ultrasonic level transmitter for water, oil and diesel tanks, treatment plants and open channels, with 2.5, 5, 10 or 15 m range, 4–20 mA or 0–5 V plus RS485 (Modbus RTU) output, an M68×2 thread and IP67 (IP68 optional).
- Range
- 2.5 / 5 / 10 / 15 m
- Output
- 4–20 mA or 0–5 V + RS485
- Protection
- IP67 (IP68 optional)
Features
- Non-contact ultrasonic measurement in distance or level mode
- Ranges of 2.5, 5, 10 or 15 m with a small blind zone
- 4–20 mA or 0–5 V plus RS485 (Modbus RTU), or RS485 only
- Automatic temperature compensation from 0 to 50 °C
- Reverse polarity, surge and lightning protection
- Polypropylene and glass-fibre housing, IP67 standard, IP68 optional
Typical applications
Full specifications
PDF DW-ULT Datasheet| Performance | |
|---|---|
| Measuring principle | Ultrasonic, non-contact |
| Measuring range | 2.5 m / 5 m / 10 m / 15 m (others on request) |
| Blind zone | ≤200 mm (2.5 m and 5 m); ≤300 mm (10 m); ≤500 mm (15 m) |
| Accuracy | 0.5% F.S. (typical); 0.25% F.S. (on request) |
| Beam angle | 12° |
| Measuring mode | Distance (default) or level |
| Response time | 0.5 s (2.5 m, 5 m), 1 s (10 m), 2 s (15 m); adjustable 0.5–10 s |
| Temperature compensation | Automatic, 0–50 °C |
| Output | |
| Output signal | 4–20 mA + RS485 / 0–5 V + RS485 / RS485 only / 4–20 mA / 0–5 V (analog 3-wire) |
| Communication protocol | Modbus RTU over RS485 |
| Baud rate | 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps |
| Electrical | |
| Supply voltage | 24 V DC (standard); 12 V DC (on request) |
| Operating current | ≤300 mA |
| Protection | Reverse polarity, surge and lightning protection |
| Mechanical | |
| Installation method | Nut clamping or screw-in, M68×2 thread |
| Housing material | Polypropylene + glass fibre |
| Dimensions | Ø75 mm max. × 104 mm; M20×1.5 cable gland |
| Cable length | Without cable, 1 m or to order |
| Environmental | |
| Operating temperature | -10 to +50 °C |
| Ingress protection | IP67 (standard); IP68 (optional) |
Dimensions and wiring
Questions about the DW-ULT
What is the measuring range of the DW-ULT?
The DW-ULT (Ultrasonic Level Transmitter) has a measuring range of 2.5 / 5 / 10 / 15 m.
How accurate is the DW-ULT?
The DW-ULT (Ultrasonic Level Transmitter) is specified with an accuracy of 0.5% F.S. (typical); 0.25% F.S. (on request).
What output signal or interface does the DW-ULT use?
The output of the DW-ULT (Ultrasonic Level Transmitter) is 4–20 mA or 0–5 V + RS485.
What is the IP rating of the DW-ULT?
The DW-ULT (Ultrasonic Level Transmitter) has an ingress protection rating of IP67 (IP68 optional).
What is the DW-ULT used for?
The DW-ULT (Ultrasonic Level Transmitter) is typically used for water, oil and diesel tanks, pump control in tanks, water treatment plants, food and chemical industries, and rivers, channels and lakes.
Where can I get the DW-ULT datasheet?
The DW-ULT datasheet is a free PDF on this page, with the full specification table. For drawings in CAD format or a custom version, contact DWIN sales.
Does DWIN offer OEM or custom versions of the DW-ULT?
Yes. DWIN adapts the DW-ULT from its existing design: housing and mounting, cable and connector, interface and protocol, firmware and range. Engineering confirms feasibility, then DWIN builds samples for your tests before series production.
How do I get a quote or samples of the DW-ULT?
Use the quote form on this page or email xyx@gzdwin.com with the DW-ULT, your quantity, application and destination country. DWIN sales replies with pricing, lead time and sample availability.