DW-RTD Screw-In RTD and Thermocouple Temperature Sensor, Pt100 or Pt1000, Optional 4–20mA

DW-RTD

Screw-In RTD and Thermocouple Temperature Sensor, Pt100 or Pt1000, Optional 4–20mA

Head-type screw-in temperature sensor with a Pt100 or Pt1000 RTD or a thermocouple, an optional 4–20 mA head-mounted transmitter, a 304 or 316L stainless steel probe of 20 to 1000 mm and threaded, clamp or flange connections, for liquids and gases in pipes and vessels.

Sensing element
Pt100, Pt1000 or thermocouple
Output
RTD/TC direct or 4–20 mA
Temperature range
−50 to +250 °C

Features

  • Pt100 or Pt1000 RTD (dual Pt100 optional), or thermocouple types B, E, J, K, N, R, S and T
  • Optional head-mounted 4–20 mA two-wire transmitter
  • Mineral-insulated measuring insert: quick response, bendable, vibration resistant
  • Reliable sealing under vacuum and overpressure
  • Probe Ø4, 6 or 8 mm and 20 to 1000 mm long, in 304 or 316L stainless steel
  • Aluminium terminal head with M20×1.5 cable gland, IP65

Typical applications

  • Air conditioning and refrigeration
  • HVAC
  • Apparatus engineering
  • Liquids and gases in process pipes and vessels

Full specifications

PDF DW-RTD Datasheet EN
DW-RTD specifications as published. Values are typical unless stated.
Performance
Sensing elementPt100 / Pt1000 / Cu50 RTD (dual Pt100 optional); thermocouple type B, E, J, K, N, R, S or T
Temperature range−50 to +250 °C (standard screw-in probe)
AccuracyClass A: ±(0.15 + 0.002|t|) °C; Class B: ±(0.3 + 0.005|t|) °C (IEC 751)
Pt100 R(100 °C)/R(0 °C)1.3851
Measuring current< 2 mA
Output
Output signalRTD or thermocouple direct, or 4–20 mA two-wire via head-mounted transmitter
Electrical
Supply voltage12–40 V DC (with transmitter)
Load resistanceRL ≤ (U − 12) / 0.021 Ω (transmitter)
Response time90% of final value in 1 s (transmitter)
Temperature drift0.02% FS/°C (standard); 0.0075% FS/°C (isolated) (transmitter)
Wiring2-wire or 3-wire RTD connection
Mechanical
Process connectionM20×1.5, M27×2, M14×1.5, G1/4, G1/2, G3/4, NPT1/4, NPT1/2, NPT3/4, G1/2 sleeve, 2" clamp, others
Installation methodFlange, clamp, direct insertion or screw base
Probe diameterØ4, Ø6 or Ø8 mm; Ø8–Ø16 mm with detachable sleeve; others
Probe length20 to 1000 mm, others on request
Material304 or 316L stainless steel (probe and connection)
Terminal headAluminium alloy, M20×1.5 cable gland, IP65
Cold-end length0, 50 or 100 mm, or to order
Environmental
Ambient temperature−40 to +80 °C (transmitter)
Storage temperature−40 to +100 °C (transmitter)
Vibration resistance4 g, 2–150 Hz (transmitter)

Questions about the DW-RTD

How accurate is the DW-RTD?

The DW-RTD (Screw-In RTD and Thermocouple Temperature Sensor) is specified with an accuracy of Class A: ±(0.15 + 0.002|t|) °C; Class B: ±(0.3 + 0.005|t|) °C (IEC 751).

What output signal or interface does the DW-RTD use?

The output of the DW-RTD (Screw-In RTD and Thermocouple Temperature Sensor) is RTD/TC direct or 4–20 mA.

What supply voltage does the DW-RTD need?

The DW-RTD (Screw-In RTD and Thermocouple Temperature Sensor) is powered by 12–40 V DC (with transmitter).

What is the sensing element of the DW-RTD?

The DW-RTD (Screw-In RTD and Thermocouple Temperature Sensor) is specified with a sensing element of Pt100, Pt1000 or thermocouple.

What is the DW-RTD used for?

The DW-RTD (Screw-In RTD and Thermocouple Temperature Sensor) is typically used for air conditioning and refrigeration, HVAC, apparatus engineering, and liquids and gases in process pipes and vessels.

Where can I get the DW-RTD datasheet?

The DW-RTD datasheet is a free PDF on this page, with the full specification table. For drawings in CAD format or a custom version, contact DWIN sales.

Does DWIN offer OEM or custom versions of the DW-RTD?

Yes. DWIN adapts the DW-RTD from its existing design: housing and mounting, cable and connector, interface and protocol, firmware and range. Engineering confirms feasibility, then DWIN builds samples for your tests before series production.

How do I get a quote or samples of the DW-RTD?

Use the quote form on this page or email xyx@gzdwin.com with the DW-RTD, your quantity, application and destination country. DWIN sales replies with pricing, lead time and sample availability.

Ask about the DW-RTD

Send your application, quantity and interface. We reply with pricing, lead time and sample availability.

Request a quote