DW-HT Duct Humidity and Temperature Transmitter, 4–20mA, 0–10V or RS485

DW-HT

Duct Humidity and Temperature Transmitter, 4–20mA, 0–10V or RS485

Duct-mounted humidity and temperature transmitter for −40 to +80 °C and 0–100% RH, with ±0.5 °C and ±3% RH accuracy, 4–20 mA, 0–5 V, 0–10 V or RS485 (Modbus RTU) output and a 10–30 V DC supply, for HVAC ducts.

Measuring range (temperature)
−40 to +80 °C
Measuring range (humidity)
0–100% RH
Output
4–20 mA, 0–5 V, 0–10 V or RS485

Features

  • Flange mounting with silicone sealing ring for duct insertion
  • 4–20 mA, 0–5 V, 0–10 V or RS485 (Modbus RTU) output
  • Optional LED display
  • Spring-type screwless wiring terminals
  • EMC-resistant design with industrial-grade chips
  • 10–30 V DC wide-range supply

Typical applications

  • HVAC duct control for comfort and energy saving
  • Factories, museums, schools and printing houses
  • Outdoor air reference
  • Light industry

Full specifications

PDF DW-HT Datasheet EN
DW-HT specifications as published. Values are typical unless stated.
Performance
Measuring range (temperature)−40 to +80 °C
Measuring range (humidity)0–100% RH
Temperature accuracy±0.5 °C (at 25 °C)
Humidity accuracy±3% RH (at 60% RH, 25 °C)
Long-term stability (temperature)≤0.1 °C/year
Long-term stability (humidity)≤1% RH/year
Response timeTemperature ≤25 s, humidity ≤8 s (air speed 1 m/s)
Output
Output signal4–20 mA / 0–5 V / 0–10 V / RS485 (Modbus RTU)
DisplayOptional LED display
Electrical
Power supply10–30 V DC
Power consumptionMax. 0.1 W (RS485); 1.3 W (analog)
WiringSpring-type screwless terminals, 0.3–2.0 mm² wire
Environmental
Operating temperature−20 to +60 °C, 0–80% RH (electronics)
Mechanical
Installation methodDuct insertion through a 16 mm hole; flange with silicone seal, 3 screws
DimensionsHousing 80 × 80 mm; probe 180 mm long, Ø14 mm tip with 45 mm sensing section; flange Ø57 mm, 3 × Ø4 mm holes

Dimensions and wiring

Drawing 1 for DW-HT

Questions about the DW-HT

What is the measuring range of the DW-HT?

The DW-HT (Duct Humidity and Temperature Transmitter) has a measuring range of −40 to +80 °C (temperature); 0–100% RH (humidity).

What output signal or interface does the DW-HT use?

The output of the DW-HT (Duct Humidity and Temperature Transmitter) is 4–20 mA, 0–5 V, 0–10 V or RS485.

What supply voltage does the DW-HT need?

The DW-HT (Duct Humidity and Temperature Transmitter) is powered by 10–30 V DC.

What is the measuring range (temperature) of the DW-HT?

The DW-HT (Duct Humidity and Temperature Transmitter) is specified with a measuring range (temperature) of −40 to +80 °C.

What is the DW-HT used for?

The DW-HT (Duct Humidity and Temperature Transmitter) is typically used for HVAC duct control for comfort and energy saving, factories, museums, schools and printing houses, outdoor air reference, and light industry.

Where can I get the DW-HT datasheet?

The DW-HT datasheet is a free PDF on this page, with the full specification table. For drawings in CAD format or a custom version, contact DWIN sales.

Does DWIN offer OEM or custom versions of the DW-HT?

Yes. DWIN adapts the DW-HT from its existing design: housing and mounting, cable and connector, interface and protocol, firmware and range. Engineering confirms feasibility, then DWIN builds samples for your tests before series production.

How do I get a quote or samples of the DW-HT?

Use the quote form on this page or email xyx@gzdwin.com with the DW-HT, your quantity, application and destination country. DWIN sales replies with pricing, lead time and sample availability.

Ask about the DW-HT

Send your application, quantity and interface. We reply with pricing, lead time and sample availability.

Request a quote