CS-PT807
Sputtered Film Pressure Transmitter, 0.2–4.8V, M18×1.5
Sputtered film pressure transmitter for 0~2MPa…40MPa, with 0.2~4.8VDC output, 0.5 %BFSL accuracy and a fully welded structure with M18 × 1.5 female interface.
- Range
- 0–2MPa
- Accuracy
- ±0.5% F.S.
- Output
- (0.2±0.1)V~(4.8±0.1)VDC
- Protection
- ≥ IP65
Features
- Fully welded, no O-ring, no leakage risk
- High overload and burst pressure
- Y4-4ZJBM connector with 1.5m cable
- Over voltage and reverse voltage protection
- Interfaces and outputs can be customized
Typical applications
Full specifications
PDF CS-PT807 Datasheet| Performance specifications | |
|---|---|
| Pressure range (option 1) | 0–2MPa |
| Pressure range (option 2) | 0–10MPa, 0–35MPa, 0–40MPa |
| Overload pressure (0~2MPa) | 150%F.S |
| Overload pressure (0~10MPa to 0~40MPa) | 120%F.S |
| Burst pressure (0~2MPa) | 200%F.S |
| Burst pressure (0~10MPa to 0~40MPa) | 150%F.S |
| Accuracy at room temperature | ±0.5% F.S. |
| Temperature error | ±1.0%F.S (-40°C~60°C) |
| Settling time | (10%~90%) ≤10ms |
| Clipping voltage | Upper: ≤6.5V; Lower: ≥0V |
| Long-term stability | ±0.5%F.S / year |
| Leak rate | ≤1.0×10^7 Pa•m³/s |
| Electrical | |
| Output signal | (0.2±0.1)V~(4.8±0.1)VDC |
| Power supply (u+) | 15V±1.5VDC |
| Current without load | ≤ 10mA |
| Output resistance | ≤ 1KΩ |
| Over voltage | 20VDC |
| Reverse voltage | -20VDC |
| Ripple voltage | ≤10mVrms |
| Insulation resistance | ≥ 100MΩ@50VDC |
| Electrical connection | Y4-4ZJBM (with 1.5m cable) |
| Environmental | |
| Working temperature | -40°C~60°C |
| Storage temperature | -40°C~85°C |
| Vibration resistance | 10g, 5–2000Hz |
| Shock resistance | 20g, 11ms half sine |
| Mechanical | |
| Pressure connection | M18 x 1.5 Female (with threaded sleeve) |
| Ingress protection | ≥ IP65 |
| Housing material | Default: 316L stainless steel |
| Medium compatibility | N2, He, kerosene (medium resistance for 6 months) |
| Mass | ≤200g |
Dimensions and wiring
Questions about the CS-PT807
What is the range of the CS-PT807?
The CS-PT807 sputtered film pressure transmitter, 0.2–4.8v, m18×1.5 is specified with a range of 0–2MPa.
What is the accuracy of the CS-PT807?
The CS-PT807 sputtered film pressure transmitter, 0.2–4.8v, m18×1.5 is specified with a accuracy of ±0.5% F.S..
What is the output of the CS-PT807?
The CS-PT807 sputtered film pressure transmitter, 0.2–4.8v, m18×1.5 is specified with a output of (0.2±0.1)V~(4.8±0.1)VDC.
Where can I get the CS-PT807 datasheet?
The CS-PT807 datasheet is a free PDF on this page, with the full specification table. For drawings in CAD format or a custom version, contact DWIN sales.
